Step by Step Guide for Aircel GPRS settings on PC
I recently tried AIRCEL GPRS on my PC.
I didn’t get any information from the Customer Care. But Google is the best friend ….
I got extensive information form below website:
I followed the steps given in it.
How to connect Aircel GPRS to PC (Windows 7) via Bluetooth modem or mobile phone
Step 01: Send a request through an SMS (Send <GPRS>to 121) or call the customer care (121).
Get the settings:
Step 02: After the request they will send u the settings within 24 hours.
Step 03: Now e-recharge with Rs 14(three days) or Rs: 98(30 days) .If you have balance, you can activate this service by sending SMS<P14> or <P98> to 57788 .This is a toll free number.
Connecting to Pc :
Step 04: Switch on Bluetooth in your phone and PC.
Step 05: In PC select Phone and Modem in Control Panel and select modems tab.
Step 06: Select Standard Modem over Bluetooth link and click Properties.
Step 07: In Generals tab click Change Settings
Step 08: Click Diagnostics tab and then Query Modem to check whether the modem is working properly.
Step 09: In Advanced tab type the following as Extra initialization command:
If yours is prepaid: AT+CGDCONT=1,”IP”,”aircelgprs.pr”
above did’t work so I changed
from “aircelgprs.pr” to “aircelgprs”
For post paid: AT+CGDCONT=1,”IP”,”aircelgprs.po”
And then press OK.
Step 10: Open Network and Sharing Center
Click Set up a new connection or network
Step 11: Select Set up a dial up connection and then press Next.
Step 12: Select Standard Modem over Bluetooth link
Step 13: If Aircel GPRS is the default profile type *99# in the Dial-up phone number box and then press Connect.
If it doesn’t work try the following one after the other:
*99***4# and so on
1,2,3,4 is nothing but the order of Aircel
GPRS profile in your phone’s GPRS account.